CP900L
Hardware | |
Interface | - 1 *10/100Mbps port (LAN1, Passive PoE in) - 1 *10/100Mbps port (LAN2, Passive PoE in) - 1*DC power port |
| Power Supply | - 12V passive PoE / 12V DC/2A - Voltage Range：12V DC |
Button | - 1 *Reset button |
Antenna | - 2 *Internal 9dB antennas |
LED Indicator | - 1 *LAN1, 1 *LAN2, 2 *signal strength |
Dimensions | - 130*76*48.5MM |
Wireless | |
| standard | - IEEE 802.11ac - IEEE 802.11n - IEEE 802.11a |
RF Frequency | - 5.15~5.85GHz |
Data Rate | - Up to 867Mbps |
Transmitting power | - < 23dBm |
| Wireless Security | - 64/128-bit WEP, WPA/WPA2/WPA-PSK/WPA2-PSK |
Receive sensitivity | - 11n(HT20): -68 dBm@10% PER - 11n(HT40): -65 dBm@10% PER - 11a: -72 dBm@10% PER - 11ac(VHT80): -55 dBm@10% PER |
Software | |||||
| Operation Mode | - AP Mode - Repeater Mode - Client Mode - WISP Mode | ||||
Network | - LAN Setting - WAN Setup (WISP Mode only) | ||||
Wireless | - Basic Setting, MAC Authentication, Advanced Setting, Multiple SSIDs | ||||
MIMO | - 5G 2Tx-2Rx | ||||
| Management | - Administrator Setting, Time Setting, Upgrade Firmware, System Configuration, System Log, Reboot Schedule, Logout | ||||
Security | - IP65 level dustproof and waterproof | ||||
Others | |||||
| Package Contents | - CP900L wireless outdoor CPE *1 - Power adaptor *1 - Quick installation guide *1 - Ethernet Cable *1 - stripes*2 | ||||
| Environment | - Operating temperature: -30℃~55℃(-22 ℉~131℉) - Storage temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating humidity: 10%~90% No condensation - Storage humidity: 5%~90% No condensation | ||||
